Registering Users And Setting The Signature Method; Configuring The Security Function, Logout, Password Management Function, Etc - YOKOGAWA GX10 User Manual

2.2 Registering Users and Setting the Signature
Method
2.2.1 Configuring the Security Function, Logout, Password Management
Function, Etc.
Path
Description
IM 04L51B01-05EN
Procedure for Configuring the Login and Signature Features for the First
Time
When the advanced security function is enabled, the GX/GP is configured so that you
can operate it without logging in. First, register an administrator. After you register an
administrator, a user, or a monitor user, you will have to log in before you can use the GX/
GP.
For an explanation of this function, see section 1.3, "Login Function" and section 1.6,
"Signature Function".
GX/GP: MENU key > Browse tab > Setting > Setting menu Security settings > Basic
settings
Hardware configurator: Security settings > Security basic settings
Security function
Setup Item
Touch operation
Communication
Touch operation
Set the type of touch screen security to apply.
Options Description
Off Disables the security function
Login Enables the login function
Communication
To apply communication access security, set this to Login.
Options Description
Off Disables the security function
Login Allows only registered users to access the GX/GP via communication
Note
If Touch operation is set to Login, configure User settings and User property and then save the
settings. If you save immediately after setting Login, you will exit from the setup menu and be
logged out. You must log in to configure User settings and User property.
1
Logout
Setup Item
Auto logout
Operation without Login
1 Appears when Touch operation in Security settings is set to Login.
Auto logout
Options Description
Off Stays logged in until the user logs out.
1min to 10min When you log in through touch operation, you will be automatically logged out
when there is no activity for the specified duration.
This does not work for FTP server or Web application.
Use Timeout function to set the auto logout for Ethernet communication .
See section 1.21.7, "Configuring the Server Function" in the User's Manual.
Selectable Range or Options
Off, Login
Off, Login
Selectable Range or Options
Off/1min/2min/5min/10min
Off/On
1
2
3
App
Default
Value
Off
Off
Default
Value
Off
Off
2-3