Gx, Gp, Or Gm Configuration; Configuring Ip Address, Host Information, Dns, And Other Settings; Configuring The Slmp Client - YOKOGAWA SMARTDAC+ GX10 User Manual

GX, GP, or GM Configuration
Configuring IP Address, Host Information, DNS, and Other Settings
Configuring the SLMP Client
Basic Settings
Path
Description
IM 04L51B01-21EN
Configure the following to prepare the GX, GP, or GM.
• IP address and other settings for connecting to Ethernet
• SLMP client basic settings
• SLMP server settings
• SLMP client command settings
GX/GP: See section 1.17, "Configuring the Ethernet Communication Function," in the
User's Manual (IM 04L51B01-01EN).
GM: See section 2.18, "Configuring the Ethernet Communication Function," in the User's
Manual (IM 04L55B01-01EN).
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > SLMP client settings > Basic settings
Web application: Config. tab > Communication (Ethernet) settings > SLMP client basic
settings
Hardware configurator: Communication (Ethernet) settings > SLMP client basic settings
SLMP client function
Setup Item
On/Off
On/Off
Set to On to enable the SLMP client function.
Data code*
Setup Item
Data code
* You can set this when the SLMP client function is set to On.
Data code
Data code for communicating with the SLMP server. Set this the same as the SLMP server.
Communication*
Setup Item
Interval
* You can set this when the SLMP client function is set to On.
Interval
Set the interval for communicating with the SLMP server.
Selectable Range or Options
Off/On
Selectable Range or Options
Binary or ASCII
Selectable Range or Options
100 ms/200ms/500ms/1s/2s/5s/10s/20s/30s/
1min
Default
Value
Off
Default
Value
Binary
Default
Value
1s
3