Printing Problems
Control Centre
Will Not Print
Digital Indicia is
Incomplete or
Streaked, Poor
Print Quality
Display Problems
Display is Hard
to Read
SV61891 Rev. A
DM230L, DM330L, DM350L Operating Guide
Control centre is in seal-only mode.
This mode disables printing. Press the CE/C to return to the postage mode
and resume printing.
Print nozzles are clogged.
Perform a print test:
1. Press the Options key twice.
2. Select Ink Functions.
3. Select Maintenance and follow the prompts.
If the test sample shows gaps, perform printer maintenance as prompted.
You can repeat this up to three times. See the instructions in Maintaining the
Printer in Chapter 6.
If printer maintenance fails to correct the problem, call for service. You may
have to replace the printhead.
Example of poor / streaked indicia
Display contrast needs adjustment
1. Press Options.
2. Select Setup Menu.
3. Select Basic Settings.
4. Select Display Contrast.
5. Select the contrast level you want: 1 is the darkest; five is the lightest.
6. Press Enter.
7. Press CE/C to return to the ready screen.
7-9