Printing Problems - Pitney Bowes series DM200i series Operator's Manual

Printing Problems

Machine won't print
Machine is in seal-only mode
This mode disables printing. Press Home to return to Home screen
and resume printing.
Digital meter stamp is incomplete or streaked; poor print quality
Print nozzles clogged
IMPORTANT: Always ensure that your prints are clear
and complete. Poor prints may be rejected by your Postal
Authority. If you notice missing lines in the print as shown
in the illustrations below, perform a printhead purge as
described on page 7-11 of this guide.
The indicia above are black and white representations of the
approved Red indicia. Only Red Non-Fluorescent approved ink
should be used in the machine.
If printer maintenance fails to correct the problem, call your machine
supplier. You may have to replace the printhead.
SDC570F
UK
Channel Islands
8 • Troubleshooting
ROI
Isle of Man
8-3