Pitney Bowes DM230L Operator's Manual page 32

SV61891 Rev. A
DM230L, DM330L, DM350L Operating Guide
1. LED - Lights green when your control centre is on. Turns orange when
your control centre is in sleep mode.
2. Operator Display - Shows the current status of your control centre. It
normally displays the settings you use most often.
3. Lock Control Centre - When on, this feature prevents unauthorized
use of your control centre. Enter your four-digit password to unlock the
control centre.
4. Normal Preset - Press to return to the factory default setting.
5. Custom Presets - Press to select from a list of up to 10 custom set-
tings. You can assign a number of values (e.g., ad, account number
and others) to each custom preset.
6. Date/Ad - Press to change the date or choose the ad you want to print.
7. Account - (This feature is optional.) Press to select from a list of
accounts. The control centre charges the postage used to the account
you select and stores the information for report printing.
8. Tape - Press to print a tape strip. Apply tape strips to oversize enve-
lopes and packages. NOTE: The Tape button is only functional with the
DM330L and DM350L.
9. Acct/Batch Totals - Press to see the total postage used and number
of pieces charged to an account. If the accounting feature is not
enabled (on), the display shows the total postage used and number of
pieces of mail processed since the batch register was last reset.
10. Class - Press to select the class of mail service. This is a required
action for all mail processing jobs.
11. Refill - Press to add postage to your control centre.
12. Options (no) - Press to select operating mode, check print quality,
print reports or set your system up. Also press to answer "No" to a
display prompt.
13. Enter (yes) - Press to confirm an operation or answer "Yes" to a
prompt.
14. Funds - Press to see the postage funds available, funds used and
number of mail pieces processed by your system. You can also print a
funds report for your records.
15. Alpha Keypad - Use this to type in account names and other
information when you set your system up.
16. Numeric Keypad - Use this to key in postage values (Corrections,
Statement of Mailings / Manifests), refill amounts and other numerical
information. Press CE/C to clear an entry or move back through the
setup menus to exit them.
2-9