Pitney Bowes DM230L Operator's Manual page 111

6 • Maintenance
Removing and
Cleaning the
DM350L
continued...
6-8
3. Pull the brush out of the brush holder as shown here.
4. Wash the brush under running water. Replace the brush back in the
brush holder.
Remove the Holder and Wick (DM350L)
1. Remove the holder and wick from
the moistener assembly as shown
on the right.
2. Wash the holder and wick under
running water.
3. Replace the wick and holder.
Reinstall the Moistener Container and Moistener Assembly (DM350L)
1. Carefully slide the moistener assembly back into the system along the
guide bars until it snaps into place.
2. Replace the moistener container.
Holder
Wick
Moistener
assembly
SV61891 Rev. A