2 • Getting to Know Your System
Machine Features - Side, Rear of DM230L/DM330L and DM350L
7
1
Control centre and the
mailing system base.
2-12
6
1. Rear Cover - Open the rear cover to replace the ink cartridge. See
Chapter 6 for instructions.
2. Power Receptacle - The power cord goes here
3. Autofeeder Port - (DM350L Only) Autofeeder cable attaches here.
4. Serial Port - Use this to connect your control centre to a Pitney Bowes
serial printer.
5. Phone Jack - Plug an analog phone line here. (Fax machines are
usually connected to an analog phone line.) The jack accepts a stan-
dard RJ-11 phone plug. If your control centre is hooked to a phone
line, you can add postage anytime using the one-button refill feature.
See Chapter 5 for details.
6. USB Port - Use this to connect your control centre to external devices
that support the USB communications protocol.
7. Base LED - This stays lit when power is applied to the system and
blinks when there is an error condition in the base. Refer to Blink
Codes in Chapter 7 for details.
5
4
3
2
SV61891 Rev. A