Client List Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.8.4

Client List Menu Command

Note
This menu command is available only in the access point mode.
Logged on Clients
All the clients logged on at the SCALANCE W78x along with certain additional
information (wireless channel, status etc.) are displayed here.
MAC address
The MAC address of the client.
If#
This specifies the wireless interface over which the client is connected.
Signal
The signal strength of the client. The higher the value, the better the signal. The
user can choose between percentage and dBm.
Age
Displays the time that has elapsed since the last client activity was detected.
Sec
This indicates which encryption is active.
Channel.
The current channel over which the client communicates with the SCALANCE
W78x.
State
The current state of the clients. Associated means that the client is logged on.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
230