Configuring Ipv6 Is-Is Route Control - HP 5500 EI series Configuration Manual

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

Configuring IPv6 IS-IS route control

Before you configure IPv6 IS-IS route control, complete basic IPv6 IS-IS configuration.
To configure IPv6 IS-IS route control:
Step
1.
Enter system view.
2.
Enter IS-IS view.
3.
Specify a preference for
IPv6 IS-IS routes.
4.
Configure an IPv6 IS-IS
summary route.
5.
Generate an IPv6 IS-IS
default route.
6.
Configure IPv6 IS-IS to
filter redistributed routes.
7.
Configure IPv6 IS-IS to
filter received routes.
8.
Configure IPv6 IS-IS to
redistribute routes from
another routing protocol.
9.
Configure the maximum
number of redistributed
Level 1/Level 2 IPv6
routes.
10.
Configure route
advertisement from Level-2
to Level- 1 .
11.
Configure route
advertisement from Level- 1
to Level-2.
12.
Specify the maximum
number of ECMP routes for
load balancing.
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
ipv6 preference { route-policy
route-policy-name | preference } *
ipv6 summary ipv6-prefix prefix-length
[ avoid-feedback | generate_null0_route |
[ level-1 | level-1-2 | level-2 ] | tag tag ] *
ipv6 default-route-advertise [ [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name ] *
ipv6 filter-policy { acl6-number | prefix-list
prefix-list-name | route-policy
route-policy-name } export [ protocol
[ process-id ] ]
ipv6 filter-policy { acl6-number | prefix-list
prefix-list-name | route-policy
route-policy-name } import
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 | level-1-2
| level-2 ] | route-policy route-policy-name |
tag tag ] *
ipv6 import-route limit number
ipv6 import-route isisv6 level-2 into level-1
[ filter-policy { acl6-number | prefix-list
prefix-list-name | route-policy
route-policy-name } | tag tag ] *
ipv6 import-route isisv6 level-1 into level-2
[ filter-policy { acl6-number | prefix-list
prefix-list-name | route-policy
route-policy-name } | tag tag ] *
ipv6 maximum load-balancing number
373
Remarks
N/A
N/A
By default, the default
setting is 15.
By default, no IPv6 IS-IS
summary route is
configured.
By default, no IPv6 default
route is generated.
By default, IPv6 IS-IS does
not filter redistributed
routes.
This command is usually
used together with the ipv6
import-route command.
By default, IPv6 IS-IS does
not filter received routes.
By default, IPv6 IS-IS does
not redistribute routes from
any other routing protocol.
The default setting depends
on the device model.
By default, IPv6 IS-IS does
not advertise routes from
Level-2 to Level-1.
By default, IPv6 IS-IS
advertises routes from
Level-1 to Level-2.
The default setting depends
on the device model.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents