HP 5500 EI series Configuration Manual page 230

Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv6 unicast
address family view or
BGP-VPN IPv6 unicast
address family view.
4. Permit the local AS number to
appear in routes from a peer
or peer group and specify the
appearance times.
Disabling BGP from considering AS_PATH during best route selection
To disable BGP from considering AS_PATH during best route selection (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
4. Disable BGP from considering
AS_PATH during best route
selection.
To disable BGP from considering AS_PATH during best route selection (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address } allow-as-loop
[ number ]
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
address-family ipv4 [ unicast ]
bestroute as-path-neglect
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
219
Remarks
N/A
N/A
N/A
By default, the local AS number is
not allowed in routes from a peer
or peer group.
Remarks
N/A
N/A
N/A
By default, BGP considers
AS_PATH during best route
selection.
Remarks
N/A
N/A