HP 5500 EI series Configuration Manual page 233

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

Step
2.
Enter BGP view or BGP-VPN
instance view.
3.
Configure AS number
substitution for a peer or peer
group.
Removing private AS numbers from updates sent to an EBGP peer or peer group
Private AS numbers are typically used in test networks, and should not be transmitted in public networks.
The range of private AS numbers is from 64512 to 65535.
To remove private AS numbers from updates sent to an EBGP peer or peer group (IPv4):
Step
1.
Enter system view.
2.
Enter BGP view or BGP-VPN
instance view.
3.
Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
4.
Configure BGP to remove
private AS numbers from the
AS_PATH attribute of updates
sent to an EBGP peer or peer
group.
To remove private AS numbers from updates sent to an EBGP peer or peer group (IPv6):
Step
1.
Enter system view.
2.
Enter BGP view or BGP-VPN
instance view.
3.
Enter BGP IPv6 unicast
address family view or
BGP-VPN IPv6 unicast
address family view.
Command
Enter BGP view:
bgp as-number
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
peer { group-name |
ipv6-address } substitute-as
Command
system-view
Enter BGP view:
bgp as-number
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
address-family ipv4 [ unicast ]
peer { group-name | ip-address }
public-as-only
Command
system-view
Enter BGP view:
bgp as-number
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
address-family ipv6 [ unicast ]
222
Remarks
N/A
By default, AS number substitution
is not configured.
Remarks
N/A
N/A
N/A
By default, this feature is not
configured.
This command is only applicable to
EBGP peers or peer groups.
Remarks
N/A
N/A
N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents