HP 5500 EI series Configuration Manual page 367

NextHop : FE80::F40D:0:93D0:1
*Destination: 2001:1::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
*Destination: 2001:2::/64
Type : I
NextHop : directly-connected
*Destination: 2001:3::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
Total: 4
Intra area: 1
3. Configure Area 2 as a stub area:
# Configure Router D.
[RouterD] ospfv3
[RouterD-ospfv3-1] area 2
[RouterD-ospfv3-1-area-0.0.0.2] stub
[RouterD-ospfv3-1-area-0.0.0.2] quit
[RouterD-ospfv3-1] quit
# Configure Router C, and specify the cost of the default route sent to the stub area as 10.
[RouterC] ospfv3
[RouterC-ospfv3-1] area 2
[RouterC-ospfv3-1-area-0.0.0.2] stub
[RouterC-ospfv3-1-area-0.0.0.2] default-cost 10
# Display OSPFv3 routing table on Router D.
[RouterD] display ospfv3 routing
-------------------------------------------------------------------------
E1 - Type 1 external route,
E2 - Type 2 external route,
*Destination: ::/0
Type : IA
NextHop : FE80::F40D:0:93D0:1
*Destination: 2001::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
*Destination: 2001:1::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
Inter area: 3
OSPFv3 Process 1 with Router ID 4.4.4.4
IA - Inter area route,
* - Selected route
356
Interface: Eth1/2
Cost
Interface: Eth1/2
Cost
Interface: Eth1/2
Cost
Interface: Eth1/2
ASE: 0
I - Intra area route
Cost
Interface: Eth1/2
Cost
Interface: Eth1/2
Cost
Interface: Eth1/2
: 3
: 1
: 4
: 11
: 2
: 3