HP 5500 EI series Configuration Manual page 406

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

*Jun
26 13:04:33:519 2012 RouterA PBR6/7/PBR Forward Info: -MDC=1; apply next-hop
150
::2.
The output shows that Router A sets the next hop for the received packets to 150::2 according to
IPv6 PBR. The packets are forwarded through Serial 2/0.
# Ping Loopback 0 of Router B from Host A, and set the data length to 200 bytes.
C:\>ping –n 1 -l 200 10::1
Pinging 10::1 with 200 bytes of data:
Reply from 10::1: time=1ms
Ping statistics for 10::1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
The debugging information about IPv6 PBR displayed on Router A is as follows:
<RouterA>
*Jun 26 13:20:33:619 2012 RouterA PBR6/7/PBR Forward Info: -MDC=1; Policy:lab1, Node:
20,match succeeded.
*Jun
26 13:20:33:619 2012 RouterA PBR6/7/PBR Forward Info: -MDC=1; apply next-hop
151
::2.
The output shows that Router A sets the next hop for the received packets to 151::2 according to
IPv6 PBR. The packets are forwarded through Serial 2/1.
395

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents