HP 5500 EI series Configuration Manual page 204

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

Step
6.
(Optional.) Configure a
description for a peer group.
7.
Create and enter BGP IPv4
unicast address family view or
BGP-VPN IPv4 unicast
address family view.
8.
Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 1 (IPv6):
Step
1.
Enter system view.
2.
Enter BGP view or BGP-VPN
instance view.
3.
Create an EBGP peer group.
Specify the AS number for the
4.
group.
5.
Add a peer into the EBGP
peer group.
6.
(Optional.) Configure a
description for a peer group.
7.
Create and enter BGP IPv6
unicast address family view or
BGP-VPN IPv6 unicast
address family view.
8.
Enable the router to exchange
IPv6 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 2 (IPv4):
Command
peer group-name description
description-text
address-family ipv4 [ unicast ]
peer group-name enable
Command
system-view
Enter BGP view:
bgp as-number
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
group group-name external
peer group-name as-number
as-number
peer ipv6-address group
group-name [ as-number
as-number ]
peer group-name description
description-text
address-family ipv6 [ unicast ]
peer group-name enable
193
Remarks
By default, no description is
configured for the peer group.
By default, the BGP IPv4 unicast
address family view and BGP-VPN
IPv4 unicast address family view
are not created.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no AS number is
specified.
If a peer group contains peers, you
cannot remove or change its AS
number.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer group-name
as-number as-number command.
By default, no description is
configured for the peer group.
By default, the BGP IPv6 unicast
address family view and BGP-VPN
IPv6 unicast address family view
are not created.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents