HP 5500 EI series Configuration Manual page 261

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

2.2.2.2
The output shows that Router C has established an IBGP peer relationship with Router B.
3.
Configure EBGP:
# Configure Router A.
<RouterA> system-view
[RouterA] bgp 65008
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] peer 3.1.1.1 as-number 65009
[RouterA-bgp] address-family ipv4 unicast
[RouterA-bgp-ipv4] peer 3.1.1.1 enable
[RouterA-bgp-ipv4] network 8.1.1.0 24
[RouterA-bgp-ipv4] quit
[RouterA-bgp] quit
# Configure Router B.
[RouterB] bgp 65009
[RouterB-bgp] peer 3.1.1.2 as-number 65008
[RouterB-bgp] address-family ipv4 unicast
[RouterB-bgp-ipv4] peer 3.1.1.2 enable
[RouterB-bgp-ipv4] quit
[RouterB-bgp] quit
# Display BGP peer information on Router B.
[RouterB] display bgp peer ipv4
BGP local router ID : 2.2.2.2
Local AS number : 65009
Total number of peers : 2
Peer
3.3.3.3
3.1.1.2
The output shows that Router B has established an IBGP peer relationship with Router C and an
EBGP peer relationship with Router A.
# Display the BGP routing table on Router A.
[RouterA] display bgp routing-table ipv4
Total number of routes: 1
BGP local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped, h - history,
Network
* >
8.1.1.0/24
# Display the BGP routing table on Router B.
65009
AS
MsgRcvd
65009
65008
s - suppressed, S - Stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
NextHop
8.1.1.1
250
7
10
0
Peers in established state : 2
MsgSent OutQ PrefRcv Up/Down
12
10
0
3
3
0
MED
LocPrf
0
0 00:06:09 Established
State
3 00:09:16 Established
1 00:00:08 Established
PrefVal Path/Ogn
0
i

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents