HP 5500 EI series Configuration Manual page 370

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

[RouterD] interface ethernet 1/1
[RouterD-Ethernet1/1] ospfv3 1 area 0
[RouterD-Ethernet1/1] quit
# Display neighbors on Router A. The routers have the same default router priority 1, so Router D
(the router with the highest Router ID) is elected as the DR, and Router C is the BDR.
[RouterA] display ospfv3 peer
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID
2.2.2.2
3.3.3.3
4.4.4.4
# Display neighbors on Router D. The neighbor states are all full.
[RouterD] display ospfv3 peer
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID
1.1.1.1
2.2.2.2
3.3.3.3
3.
Configure router priorities for interfaces:
# Specify the router priority for the interface Ethernet 1/1 of Router A as 100.
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ospfv3 dr-priority 100
[RouterA-Ethernet1/1] quit
# Specify the router priority for the interface Ethernet 1/1 of Router B as 0.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ospfv3 dr-priority 0
[RouterB-Ethernet1/1] quit
# Specify the router priority for the interface Ethernet 1/1 of Router c as 2.
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] ospfv3 dr-priority 2
[RouterC-Ethernet1/1] quit
# Display neighbors on Router A. The output shows that the router priorities have been changed,
but the DR and BDR are not changed.
[RouterA] display ospfv3 peer
Area: 0.0.0.0
-------------------------------------------------------------------------
OSPFv3 Process 1 with Router ID 1.1.1.1
Pri State
1
2-Way/DROther
1
Full/Backup
1
Full/DR
OSPFv3 Process 1 with Router ID 4.4.4.4
Pri State
1
Full/DROther
1
Full/DROther
1
Full/Backup
OSPFv3 Process 1 with Router ID 1.1.1.1
359
Dead-Time Interface
00:00:36
Eth1/1
00:00:35
Eth1/1
00:00:33
Eth1/1
Dead-Time Interface
00:00:30
Eth1/1
00:00:37
Eth1/1
00:00:31
Eth1/1
Inst ID
0
0
0
Inst ID
0
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents