HP 5500 EI series Configuration Manual page 175

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

# Configure RIPv2 on Router D.
[RouterD] rip 1
[RouterD-rip-1] network 10.0.0.0
[RouterD-rip-1] version 2
[RouterD-rip-1] undo summary
# Configure RIPv2 on Router E.
[RouterE] rip 1
[RouterE-rip-1] network 10.0.0.0
[RouterE-rip-1] version 2
[RouterE-rip-1] undo summary
# On Router D, configure IS-IS to redistribute routes from RIP.
[RouterD-rip-1] quit
[RouterD] isis 1
[RouterD–isis-1] import-route rip level-2
# Display IS-IS routing information on Router C.
[RouterC] display isis route
IPv4 Destination
-------------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
IPv4 Destination
-------------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
10.1.4.0/24
10.1.5.0/24
10.1.6.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Route information for IS-IS(1)
-----------------------------
Level-1 IPv4 Forwarding Table
-----------------------------
IntCost
ExtCost ExitInterface
10
NULL
10
NULL
10
NULL
Level-2 IPv4 Forwarding Table
-----------------------------
IntCost
ExtCost ExitInterface
10
NULL
10
NULL
10
NULL
10
NULL
20
NULL
20
NULL
164
NextHop
Eth1/1
Direct
Eth1/3
Direct
Eth1/2
Direct
NextHop
Eth1/1
Direct
Eth1/3
Direct
Eth1/2
Direct
Eth1/2
192.168.0.2
Eth1/2
192.168.0.2
Eth1/2
192.168.0.2
Flags
D/L/-
D/L/-
D/L/-
Flags
D/L/-
D/L/-
D/L/-
R/L/-
R/L/-
R/L/-

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents