Configuration prerequisites
Before you configure route distribution and reception control, complete the following tasks:
Enable IPv6.
•
Configure IPv6 BGP basic functions.
•
Configuring IPv6 BGP route redistribution
To configure IPv6 BGP route redistribution:
Step
1.
Enter system view.
Enter BGP view.
2.
3.
Enter IPv6 address family view.
4.
Enable default route redistribution into
the IPv6 BGP routing table.
5.
Enable route redistribution from
another routing protocol.
Configuring IPv6 BGP route summarization
To reduce the routing table size on medium and large BGP networks, configure route summarization on
BGP routers. BGP supports only manual summarization of IPv6 routes.
To configure IPv6 BGP route summarization:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 address
family view.
4.
Configure manual
route summarization.
Advertising a default route to an IPv6 peer or peer group
Command
system-view
bgp as-number
ipv6-family
default-route imported
import-route protocol
[ process-id [ med med-value
| route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ipv6-family
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ] *
234
Remarks
N/A
N/A
N/A
Optional.
Not enabled by default.
If the default-route imported
command is not configured,
using the import-route command
cannot redistribute any IGP
default route.
Not enabled by default.
Remarks
N/A
N/A
N/A
Not configured by
default.