Ignoring Mtu Check For Dd Packets; Disabling Interfaces From Receiving And Sending Ospfv3 Packets; Enabling The Logging Of Neighbor State Changes - HP 5500 EI series Configuration Manual

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

Ignoring MTU check for DD packets

When LSAs are few in DD packets, it is unnecessary to check the MTU in DD packets to improve
efficiency.
To ignore MTU check for DD packets:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Ignore MTU check for DD
packets.
Disabling interfaces from receiving and sending OSPFv3
packets
After an OSPFv3 interface is set to silent, direct routes of the interface can still be advertised in
Intra-Area-Prefix LSAs through other interfaces, but other OSPFv3 packets cannot be advertised. No
neighboring relationship can be established on the interface. This feature can enhance the adaptability
of OSPFv3 networking.
To disable interfaces from receiving and sending OSPFv3 packets:
Step
1.
Enter system view.
2.
Enter OSPFv3 view.
3.
Disable interfaces from
receiving and sending
OSPFv3 packets.

Enabling the logging of neighbor state changes

With this feature enabled, the router delivers logs about neighbor state changes to its information center,
which processes logs according to user-defined output rules (whether to output logs and where to output).
For more information about the information center, see Network Management and Monitoring
Configuration Guide.
To enable the logging of neighbor state changes:
Command
system-view
interface interface-type
interface-number
ospfv3 mtu-ignore [ instance
instance-id ]
Command
system-view
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
silent-interface { interface-type
interface-number | all }
349
Remarks
N/A
N/A
By default, OSPFv3 does not
ignore MTU check for DD packets.
Remarks
N/A
N/A
By default, the interfaces are able
to receive and send OSPFv3
packets.
This command disables only the
interfaces associated with the
current process, though multiple
OSPFv3 processes can disable the
same interface from receiving and
sending OSPFv3 packets.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents