HP 5500 EI series Configuration Manual page 366

Hide thumbs Also See for 5500 EI series:
Table of Contents

Advertisement

[RouterC-Ethernet1/2] ospfv3 1 area 2
[RouterC-Ethernet1/2] quit
# Configure Router D: enable OSPFv3 and specify the router ID as 4.4.4.4.
<RouterD> system-view
[RouterD] ospfv3 1
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface ethernet 1/2
[RouterD-Ethernet1/2] ospfv3 1 area 2
[RouterD-Ethernet1/2] quit
# Display OSPFv3 neighbors on Router B.
[RouterB] display ospfv3 peer
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID
Pri State
3.3.3.3
1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID
Pri State
1.1.1.1
1
# Display OSPFv3 neighbors on Router C.
[RouterC] display ospfv3 peer
OSPFv3 Process 1 with Router ID 3.3.3.3
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID
Pri State
2.2.2.2
1
Area: 0.0.0.2
-------------------------------------------------------------------------
Router ID
Pri State
4.4.4.4
1
# Display OSPFv3 neighbors on Router D.
[RouterD] display ospfv3 routing
OSPFv3 Process 1 with Router ID 4.4.4.4
-------------------------------------------------------------------------
E1 - Type 1 external route,
E2 - Type 2 external route,
*Destination: 2001::/64
Type
: IA
Dead-Time Interface
Full/Backup
00:00:40
Dead-Time Interface
Full/DR
00:00:40
Dead-Time Interface
Full/DR
00:00:40
Dead-Time Interface
Full/Backup
00:00:40
IA - Inter area route,
*
- Selected route
355
Inst ID
Eth1/1
0
Inst ID
Eth1/2
0
Inst ID
Eth1/1
0
Inst ID
Eth1/2
0
I - Intra area route
Cost
: 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 si series

Table of Contents