Dräger WBR82 Instructions For Use Manual page 97

PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
Name
Suction gauge
Suction control
Suction On/Off switch
Rate (BPM) control (AutoBreath™
Infant Resuscitator Option)
PEEP control (AutoBreath™
Infant Resuscitator Option)
On/Off switch (AutoBreath™
Infant Resuscitator Option)
Exhalation valve (AutoBreath™
Infant Resuscitator Option)
Airway Pressure gauge
Airway Pressure Relief control
Flow Rate (LPM) control (flow
meter)
Patient Outlet connector
Airway pressure port
Auxiliary Outlet 100% oxygen
connector
Auxiliary Flow (LPM) control
Displays the suction level from 0 mm Hg (0"H
mm Hg (107"H O/mbar) of vacuum.
2
Adjusts the suction level from 0 mm Hg (0"H
mm Hg (80"H O/mbar).
2
Turns the suction on and off. (Gas supply must be turned on.)
Adjusts breath frequency from 18 to 60 breaths per minute.
Adjusts positive end expiratory pressure from 0 to 1.8 kPa.
Turns AutoBreath™ Infant Resuscitator on and off (including
PEEP).
Accepts exhaust valve line of patient circuit for expiratory valve
control.
Displays the airway pressure from -1 kPa (-10 cm H
kPa (81 cm H O/mbar).
2
Adjusts the airway pressure relief setting from 0 kPa
(0 cm H O/mbar) to 5 kPa (51 cm H
2
Adjusts the patient gas flow from 0 LPM to 15 LPM.
Accepts the patient circuit outlet line.
Accepts the breathing circuit (PN 81 001 27/ MU10900or PN 81
000 06/ MU10841). If the blender option is incorporated, it deliv-
ers the blended gas.
Connects the airway pressure gauge to the patient breathing
circuit.
Connection for the auxiliary gas delivery line at the hose barb
connection on the front panel. Provides 100% oxygen only. Use
tubing with an inner diameter of 0.25" (0.64 cm).
Adjusts the auxiliary patient gas flow from 0 LPM to 15 LPM.
Description
O/mbar) to 200
2
O/mbar) to 150
2
O/mbar).
2
O/mbar) to 8
2
5 - 11