About This Manual
This manual describes the DeviceNet Interface Option Module (called the 260IF
Module) that is mounted to the Machine Controllers listed below to perform commu-
nications with DeviceNet
• MP920 Machine Controller
• MP940 Machine Controller (built-in 260IF Module)
The DeviceNet is a multivendor field network. DeviceNet specifications are con-
trolled by the ODVA(Open DeviceNet Vendor Association, Inc.).
The 260IF Module is connected to a multivendor DeviceNet system and works as either a
DeviceNet Master or Slave.
Refer to the DeviceNet Specifications published by the ODVA for information on the
DeviceNet.
Read this manual before creating a DeviceNet system including MP900 Series
Machine Controllers and store it in a safe place for future reference.
Refer to the following related manuals for information on the Controller.
www.dadehpardazan.ir 88594014-15
TM
devices.
viii
About This Manual