Table of Contents
Advertisement
Basic Specifications
2.1 Specifications
2
The basic specifications are given for the Interface Module in the following table.
Item
Name
Model Number
Circuit Number
Applicable Communications Type
I/O Communi-
Max. No. of Slaves
cations
Max. I/O Bytes
Message
Max. No. of Nodes
Communica-
for Message
tions
Communications
(Master Only)
Max. Message
Length
Function for
Execution
Switches for Settings
Indicators
Communications Power Supply
Voltage
Current Consumption
Mass
Dimensions (mm)
www.dadehpardazan.ir 88594014-15
Specifications
260IF Module
JEPMC-CM230
1
I/O communications
Explicit messages
(Both conform to DeviceNet.)
63 nodes
2048 bytes, 256 bytes/node
63 nodes. Simultaneous communications possible with up to 8
nodes.
256 bytes
MSG-SND
Two rotary switches on the front: for node address
DIP switch on the front: Baud rate
Master/slave selection
Two LED indicators: MS and NS
24 VDC±10% (supplied from a special cable)
Communications power supply: 45 mA max. (supplied from
the communications connector)
Internal circuit power supply (supplied from the PLC)
100 g
40 × 130 × 105 (W × H × D)
2-2
Advertisement
Table of Contents
