Setting Methods - YASKAWA MP900 Series User Manual

Fig 4.6 260IF Definition Window

4.3.2 Setting Methods

The 260IF Definition Window has the following three tab pages.
Parameter
Settings
Tab Page
Parameter Settings
I/O Status
Status
Parameter Settings
The following items are set in the 260IF Definition Window shown above.
Communications Cycle Time Information
Setting
Communications Cycle
Time (Set Time)
Communications Cycle
Time (Current Time)
display only
Communications Cycle
Time (Max. Time)
display only
Refer to 4.2 Calculating Communications Cycle Times.
www.dadehpardazan.ir 88594014-15
I/O Status Status
Sets the 260IF Module communications and network parameters.
Displays the communications status with Slaves when the 260IF
Module is set to Master Mode and is online.
Refer toChapter 6 Network Maintenance for details.
Displays the 260IF Module status when online.
Refer to Chapter 6 Network Maintenance for details.
Enter the communications cycle time set value when using the
260IF Module as a DeviceNet Master.
Displays the current value of the communications cycle during I/
O communications.
Displays the maximum value for the communications cycle dur-
ing I/O communications.
4-11
4.3 260IF Module Setup
Contents
Contents
4