Table of Contents
Advertisement
4. The Network Configuration Window will be displayed.
Network Configuration
MAC ID
Node address search range (0 to 63)
Search Start
Search Item
MAC ID
I-BSIZE
O-BSIZE
DEVICE
VENDER
PRODUCT
Table 6.2 Setting and Operation Items
Setting or Operation
Item
Node Address Search
Range (0 to 63)
Search Start
Search Stop
Set
Close
5. Set the leading and end addresses for the DeviceNet devices for which information is to
be read and click the Search Start Button. To stop the search, click the Search Stop
Button.
6. Click the Set Button to use the I/O sizes found during the search for the I/O Allocation
Settings.
7. Click the Close Button to exit the Network Configuration Window.
6-3
www.dadehpardazan.ir 88594014-15
6.1 Reading Network Configuration Information
I-BSIZE
O-BSIZE
DEVICE
Start
Search Stop
Table 6.1 Search Items
Contents
The MAC ID on the DeviceNet (DeviceNet address).
The input data size (in bytes) from the relevant device.
The output data size (in bytes) to the relevant device.
The device type in decimal. The value will be 12 for the 260IF Mod-
ule (communications adapter).
Refer to DeviceNet specifications for details on device types.
The vendor ID. The value will be 44 for the 260IF Module.
The product code.
Contents
The node address (MAC ID) range to be searched for.
Starts the search for devices connected to the network.
Stops the search.
Makes I/O allocations based on the search results.
Closes the Network Configuration Window.
VENDER
VENDOR
VENDOR
End
～
Set
Close
6
Advertisement
Table of Contents
