Configuring Ipv6 Static Multicast Mac Address Entries; Displaying And Maintaining Ipv6 Multicast Routing And Forwarding - HP 5920 series Configuration Manual

To configure an IPv6 multicast forwarding boundary:
Step
1. Enter system view.
2. Enter interface view.
3. Configure an IPv6 multicast
forwarding boundary.

Configuring IPv6 static multicast MAC address entries

In Layer-2 multicast, a Layer-2 IPv6 multicast protocol (such as MLD snooping) can dynamically add IPv6
multicast MAC address entries. Or, you can manually configure IPv6 multicast MAC address entries.
When you configure IPv6 static multicast MAC address entries, follow these guidelines:
You can configure IPv6 static multicast MAC address entries on the specified interface in system
•
view, or on the current interface in interface view.
The IPv6 multicast MAC address that can be configured in the MAC address entry must be unused.
•
(The least significant bit of the most significant octet is 1.)
To configure an IPv6 static multicast MAC address entry in system view:
Step
1. Enter system view.
2. Configure a static multicast
MAC address entry.
To configure an IPv6 static multicast MAC address entry in interface view:
Step
1. Enter system view.
2. Enter Ethernet interface/
aggregate interface view.
3. Configure a static multicast
MAC address entry.
Displaying and maintaining IPv6 multicast routing
and forwarding
Command
system-view
interface interface-type
interface-number
ipv6 multicast boundary
{ ipv6-group-address prefix-length
| scope { scope-id | admin-local |
global | organization-local |
site-local } }
Command
system-view
mac-address multicast
mac-address interface interface-list
vlan vlan-id
Command
system-view
interface interface-type
interface-number
mac-address multicast
mac-address vlan vlan-id
120
Remarks
N/A
N/A
By default, no forwarding
boundary is configured.
Remarks
N/A
By default, no static multicast MAC
address entries exist.
Remarks
N/A
N/A
By default, no static multicast MAC
address entries exist.