Flexiblelom 1U Node Riser Cage Assembly - HP Apollo 2000 System Maintenance And Service Manual

Procedure
1. Power down the node.
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis.
4. Do one of the following:
• Remove the 1U left rear I/O blank.
• Remove the single-slot left PCI riser cage assembly.
5. Remove the single-slot 1U node right PCI riser cage assembly.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all PCI riser cages
or rear I/O blanks are installed, and do not operate the node unless all PCI slots have either an
expansion slot cover or an expansion board installed.

FlexibleLOM 1U node riser cage assembly

Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node .
3. Remove the node from the chassis .
4. Do one of the following:
• Remove the 1U left rear I/O blank.
• Remove the single-slot left PCI riser cage assembly.
5. Remove the FlexibleLOM 1U node riser cage assembly.
FlexibleLOM 1U node riser cage assembly 49