Table of Contents
Advertisement
Connect the GPU riser cable to the GPU and the primary riser cage PCA.
9.
Secondary riser options
The server supports low-profile or full-height risers in the secondary riser cage position.
Full height PCIe x16 riser cage assembly option
This option includes GPU support for a secondary riser.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
1.
Back up all server data.
2.
Power down the server (on page 21).
3.
Do one of the following:
o
Extend the server from the rack (on page 21).
o
Remove the server from the rack (on page 22).
4.
Remove the access panel (on page 22).
5.
Remove the primary PCI riser cage
("Remove the PCI riser
cage" on page 23).
Hardware options installation 72
Advertisement
Table of Contents
