HP A4500A - VMEbus Single Board Computer 744 Motherboard Manual

Basic cable connections - hp rp2400 series of servers.
Hide thumbs
hp rp2400 Series of Servers
Basic Cable Connections
Version 2.0
Manufacturing Part Number: rp24xx_basic_cable-en
January 2004
U.S.A.
© Copyright 2002-2004 Hewlett-Packard Development Company, L.P..

Advertising

   Related Manuals for HP A4500A - VMEbus Single Board Computer 744 Motherboard

   Summary of Contents for HP A4500A - VMEbus Single Board Computer 744 Motherboard

  • Page 1

    Series of Servers Basic Cable Connections Version 2.0 Manufacturing Part Number: rp24xx_basic_cable-en January 2004 U.S.A. © Copyright 2002-2004 Hewlett-Packard Development Company, L.P..

  • Page 2

    Legal Notices Copyright Notices. © Copyright 2002-2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

  • Page 3: Table Of Contents

    Contents 1. HP rp2400 Series of Servers - Basic Cable Connections Record System Serial Number ............7 Front Panel Controls and indicators.

  • Page 4

    Contents...

  • Page 5

    Figures Figure 1-1. Serial Number Locations ..........7 Figure 1-2.

  • Page 6

    Figures...

  • Page 7: Record System Serial Number, Figure 1-1. Serial Number Locations

    HP rp2400 Series of Servers - Basic Cable Connections To make the basic cable connections for the rp24xx Server, refer to the illustrations and instructions below. For detailed installation, maintenance, and technical information, refer to the rp24xx Hardware Manual and other documentation (search on rp2400) at http://docs.hp.com.

  • Page 8: Front Panel Controls And Indicators, Server External Connections, Figure 1-2. Controls And Led Indicators

    HP rp2400 Series of Servers - Basic Cable Connections Front Panel Controls and indicators Front Panel Controls and indicators The following section describes the controls and LED indicators at the front of the rp24xx Server as shown in the following graphic: Figure 1-2 Controls and LED Indicators Attn.

  • Page 9: Figure 1-3. External Connections To The Server

    HP rp2400 Series of Servers - Basic Cable Connections Front Panel Controls and indicators The graphic shown below illustrates locations of the external connections to the server. Figure 1-3 External Connections to the Server 100-240V~, 600W Path: 0/2/0 Path: 0/4/0 6.0-2.6A, 50-60Hz urbo urbo...

  • Page 10: Connecting Pdu(s) To Dedicated Ac Input Receptacles

    HP rp2400 Series of Servers - Basic Cable Connections Connecting PDU(s) to Dedicated AC Input Receptacles The Web Console has a default Internet Protocol (IP) address of 192.0.0.192 for rp2400 NOTE and rp2450 servers, and 127.0.0.1 for rp2430 and rp2470 servers. Make sure that no other device, including other rp24xx servers, has this address before connecting the server to your LAN.

  • Page 11: Console Connection And Configuration, Figure 1-4. Console Connection And Configuration

    HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration Console Connection and Configuration The following describes of the installation and configuration of the rp24xx server console. Figure 1-4 Console Connection and Configuration To Console/UPS port at rear server A5191-63001 COMPUTER 25-Pin...

  • Page 12: Rp24xx Server Rs-232 System Local Console Installation, Console Configuration (vt100 Mode), Figure 1-5. Console/remote-modem/ups Connector

    HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration rp24xx Server RS-232 System Local Console Installation The following describes how to install a system console on an rp24xx Server. The HP-700 series terminal is used as an example. Other terminals may be used as a system console as long as they are configured for VT100 terminal emulation mode.

  • Page 13

    HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration NOTE If you enter when the Save all? (Y/N) prompt appears, the changes will take effect, but will be lost if the terminal is reset or powered off. HP700 VT-100 Mode Configuration The following procedure outlines the steps to configure the HP700 series terminal for VT-100 operation.

  • Page 14

    HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration Chapter 1...

This manual also for:

Rp2400

Comments to this Manuals

Symbols: 0
Latest comments: