Supported Riser Cage Assemblies And Accelerator Power Cables - HP Apollo 2000 System Maintenance And Service Manual

◦ If NVIDIA Tesla P100 GPUs are installed in the server node, and the server node is installed in the HPE
Apollo r2600 Chassis, the inlet ambient temperature must be maintained at or below 20°C (68°F).
◦ To ensure proper thermal cooling when NVIDIA Tesla P40 or NVIDIA Tesla P100 GPUs are installed in
the server node, bezel blanks must be installed in specific drive bays. For more information on
supported drive configurations, see the server user guide on the Hewlett Packard Enterprise website.
For more information on the riser board slot specifications, see "PCIe riser board slot definitions."

Supported riser cage assemblies and accelerator power cables

FlexibleLOM 2U node riser cage assembly (PN 798184-B21)
Single accelerator options
• Intel Xeon Phi Coprocessor
5110P
• AMD FirePro S9150 GPU
• NVIDIA Quadro M4000 GPU
• NVIDIA Quadro K4200 GPU
Accelerator
• NVIDIA Tesla K40 GPU
Accelerator
Three-slot 11OS PCI riser cage assembly (PN 798186-B21)
Dual accelerator options
• Intel Xeon Phi Coprocessor
1
5110P
• AMD FirePro S9150 GPU
• NVIDIA Tesla K40 GPU
Accelerator
• NVIDIA Tesla M40 GPU
Accelerator
• NVIDIA Tesla P40 GPU
Accelerator
• NVIDIA Tesla P100 GPU
Accelerator
• NVIDIA GRID K2 Reverse Air
Flow GPU Accelerator
1
Dual accelerator configurations only. If installing this accelerator model, populate both slot 3 and slot 4 with
accelerators to ensure proper thermal cooling.
2
The riser cage supports both single and dual accelerator configurations for this accelerator model. If
installing a single accelerator, install it into slot 3 and leave slot 4 empty.
Three-slot Enhanced 11OS PCI riser cage assembly (PN 852767-B21)
Dual accelerator options
• AMD FirePro S9150 GPU
1
Dual accelerator configurations only. If installing this accelerator model, populate both slot 3 and slot 4 with
accelerators to ensure proper thermal cooling.
98 Supported riser cage assemblies and accelerator power cables
Power cable
800288-001
Power cable
Both 825634-001 and 825635-001
are required
1
1
Both 825636-001 and 825637-001
are required
2
2
2
Both 825634-001 and 825635-001
are required
2
Power cable
Both 825634-001 and 825635-001
1
are required
2-pin adapter cable
Not supported
2-pin adapter cables
Not supported
Not supported
805206-001 required for each
accelerator
2-pin adapter cables
Not supported