Rcm 2.0 To 1.0 Adapter Cable; Hot-Plug Drive - HP Apollo 2000 System Maintenance And Service Manual

RCM 2.0 to 1.0 adapter cable

To remove the component:
1. Power down the system.
2. Disconnect the RCM 2.0 to 1.0 adapter cable from APM.
3. Disconnect the RCM 2.0 to 1.0 adapter cable from the RCM module.
To replace the component, reverse the removal procedure.

Hot-plug drive

CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
To remove the component:
RCM 2.0 to 1.0 adapter cable 77