HP Apollo 2000 System Maintenance And Service Manual page 33

CAUTION:
To avoid damage to the node , always support the bottom of the node when removing it from the
chassis .
CAUTION:
To ensure proper thermal cooling, the four server tray slots must be populated with server nodes or
node blanks.
Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node .
3. Remove the node from the chassis:
a. Loosen the thumbscrew.
b. Pull back the handle and remove the node.
• 1U node
• 2U node
Removal and replacement procedures 33