Remove Accelerator 1 From The Flexiblelom 2U Node Riser Cage Assembly - HP Apollo 2000 System Maintenance And Service Manual

Remove Accelerator 1 from the FlexibleLOM 2U node riser cage assembly

About this task
To remove the component:
Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node .
3. Remove the node from the chassis .
4. Place the node on a flat, level surface.
5. Remove the FlexibleLOM 2U node riser cage assembly.
6. Disconnect the accelerator power cable from the bayonet board.
7. Disconnect the accelerator power cable from Accelerator 1.
8. Remove Accelerator 1 from the FlexibleLOM 2U node riser cage assembly:
• NVIDIA Tesla K40 GPU
Remove Accelerator 1 from the FlexibleLOM 2U node riser cage assembly 53