Hach sc200 User Manual page 552

Industrial Telephone Modem (SL-5MS-MDM Only)
Maximum data rates
Compatibility
Data compression
Error correction
Ringer
Jacks
Command sets
Country compatibility
Telecom ratings
"PLC" Input and Output (SL-5MS-MDM Only)
PLC / Alarm output voltage
Maximum current output
PLC / Trigger input voltage
Typically current input
"OK" Alarm Output (managed models only)
"OK" Output
Voltage
Maximum current output
Power Input:
Power input
Input power (typical with
all ports active at 100
Mbps)
Input voltage (all models)
Reverse power protection
Transient protection
Spike protection
Sixnet Slim Line Switch Installation Guide
V.90, V.34, V.32, V.32 bis, V.22, V.22 bis, V.21
Standard AT and S register
World-wide (100+ countries)
FCC Part 68; Industry Canada CS03-8; CTR21 (98/482/EC); ACA TS
Same as switch input power voltage
ON if P1 and P2 have power and switch software is running
Same as switch input voltage
Redundant Input Terminals
2.0 W (2-port converter with 1 fiber),
2.0 W (5-port unmanaged w/ 0 fiber),
3.0 W (5-port unmanaged w/ 1 fiber),
5.0 W (6-port unmanaged w/ 2 fiber),
4.0 W (8-port unmanaged w/ 0 fiber),
5.0 W (9-port unmanaged w/ 1 fiber),
8.0 W (8-port unmanaged w/ 3 fiber)
5,000 watts (10x for 10 uS)
56 Kbps
V.42 bis
V.42 MNP or LAP
0.3
2 RJ11 (phone and line)
001 and ACA TS 002
0.5 Amp
10-30 VDC
6.5 mA @ 24 VDC
0.5 Amp
3.6 W (5-port managed w/o fiber),
4.8 W (5-port with phone modem),
5.6 W (5-port managed w/ 2 fiber),
4.3 W (8-port managed w/ 0 fiber),
6.3 W (8-port managed w/ 2 fiber),
9.0 W (8-port managed w/ 4 fiber),
12 W (8-port man. gigabit w/ 0 fiber)
15 W (8-port man. gigabit w/ 4 fiber),
5.0 W (10-port man. gigabit w/ 0 fiber),
7.0 W (10-port man. gigabit w/ 2 fiber),
7.0 W (16-port man. gigabit w/ 0 fiber),
8.0 W (18-port man. gigabit w/ 0 fiber),
10 W (18-port man. gigabit w/ 2 fiber)
10-30 VDC (continuous)
Yes
15,000 watts peak
Page 28 of 30