Different Alarms Dialing Different Telephone Numbers - Hach sc200 User Manual

Hide thumbs Also See for sc200:
Table of Contents

Advertisement

PROGRAMMING EXAMPLES
YOU:
B1290:
Enter Directory
YOU:
The telephone numbers have now been programmed. Now enter the Directory Control Code
B1290:
Enter Program Code
YOU:
B1290:
Enter DTMF Code
YOU:
B1290:
Directory Control Code is...
YOU:
B1290:
Directory Control Code is 78
YOU:
B1290:
Enter Program Code
Right now the B1290 is programmed with dialing commands in Directory A and Directory B. Any alarms that
are to be switched between these two directories should be programmed to use Directory A or the control code
will have no effect. Each alarm has its own setting for the directory it is using. Make sure that the alarms you
want to have changed are set properly.
YOU:
B1290:
Enter Configuration Code
YOU:
B1290:
Alarm One is Directory is...
YOU:
B1290:
Alarm One is Directory is A
YOU:
Repeat this for all of the alarms
When you wish to dial from the B directory, call up the B1290 and follow these steps:
B1290:
Enter Control Code
YOU:
B1290:
Telephone Format is Directory B
And to change it back:
B1290:
Enter Control Code
YOU:
B1290:
Telephone Format is Directory A
Example 3: Different Alarms Dialing Different Telephone Numbers
A B1290 is used in an application where there are two different types of related alarms. Some are building alarms,
such as intrusion alarms, building temperature, power failure, etc. Others are alarms relating to specific equipment
failures, such as compressor failure, high tank level or sump overflow. It is desirable to have the maintenance
personnel alerted if there is a building alarm, but if there is a problem with the equipment, it would be preferable to
alert the operations technicians.
In this example, alarms 1 and 2 are connected to intrusion alarm and building high temperature respectively. These
are building alarms, and are to dial the building maintenance people at 403-255-9544 and then 403-255-9598.
Quit
Quit
DTMF Codes
Directory Control Code
Enter Control Code
Next
Select Configuration
Select Using Directory
Select Directory A
Next
Directory Control Code
Directory Control Code
PAGE 35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents