Monitoring And Configuring The Machine; Using Web Image Monitor - Ricoh 480W Network Manual

Ricoh 480w: network guide

Hide thumbs Also See for 480W:

Table of Contents

3. Monitoring and Configuring

Using Web Image Monitor, you can check the machine status and change set-

tings.

❖ ❖ ❖ ❖ Available operations

The following operations can be remotely performed using Web Image Mon-

itor from a client computer.

• Displaying machine status or settings

• Resetting the machine

• Managing the Address Book

• Making machine settings

• Making network protocol settings

• Making security settings

❖ ❖ ❖ ❖ Configuring the machine

To perform the operations from Web Image Monitor, TCP/IP is required. Af-

ter the machine is configured to use TCP/IP, operations from Web Image

Monitor become available.

❖ ❖ ❖ ❖ Recommended Web browser

• Internet Explorer 5.5 or higher

• Netscape Navigator 7.0 or higher

Note

❒ To use Netscape Navigator with Secured Sockets Layer (SSL: an encryption

protocol), use Netscape Navigator 7.0 or higher.

❒ If the previous versions of the Web browser above are used or JavaScript and

cookies are not enabled with the Web browser used, display and operation

problems may occur.

❒ If you are using a proxy server, change the Web browser settings. Contact

your network administrator for information about the settings.

❒ The previous page may not appear even after the back button of a Web

browser is clicked. If this happens, click the refresh button of a Web browser.

❒ Updating the machine information is not automatically performed. Click [Ap-

ply] in the display area to update the machine information.

the Machine

Table of Contents