Table 6: Black Output Formats - Tektronix SPG8000 Technical Reference

BLACK button menu
BLACK button menu
descriptions
32
FORMAT. Use the left (◄) or right (►) arrow button to select the signal format
for the selected BLACK output. Press the ENTER button to enable the format
selection.
The available format choices depend on the following: (See Figure 7.)
The CW 10 MHz format appears only for the BLACK 3 output. When CW
10 MHz is the selected output format, the other BLACK menu items are
unavailable for the BLACK 3 output.
The available HD output formats depend on whether the HD tri-level sync rate
for the selected BLACK output is set to integer or non-integer. (See Table 6.)

Table 6: BLACK output formats

Non-integer formats
NTSC
NTSC-J
PAL
CW 10 MHz 1
1080 59.94i
1080 23.98sf
1080 29.97p
1080 23.98p
720 59.94p
1 The CW 10 MHz format selection appears only for the BLACK 3 output.
FIELD REFERENCE. This menu item is available only for non-HD formats. Use
the left (◄) or right (►) arrow button to select Enable or Disable for the field
reference on the selected BLACK output. Press the ENTER button to enable
the selection.
TIMING. Press the ENTER button to access the BLACK TIMING submenu. Use
this submenu to set the vertical and/or horizontal timing offset for the selected
BLACK output. (See page 34, BLACK TIMING submenu.)
TIMECODE. This menu item is available only for non-HD formats. Press the
ENTER button to access the BLACK TIMECODE submenu. Use this submenu
to set the timecode parameters for the selected BLACK output. (See page 36,
BLACK TIMECODE submenu.)
Integer formats
NTSC
NTSC-J
PAL
CW 10 MHz 1
1080 60i
1080 50i
1080 24sf
1080 30p
1080 25p
1080 24p
720 60p
720 50p
SPG8000 Technical Reference