Tektronix SPG8000 Technical Reference page 149

SPG8000 Technical Reference
Factory Default: Use this preset to reset the mainframe and all of the
installed modules to the factory default settings. Some SYSTEM button menu
settings are not affected when the factory default settings are recalled. (See
page 166, SYSTEM button menu factory default settings.)
RECALL. Recalls instrument settings saved in the selected preset. Use the left
(◄) or right (►) arrow button to select a different preset, and then press the
ENTER button to implement the selection. While the preset is loading into the
instrument, the name of the selected preset blinks. When the loading is complete,
the blinking stops.
SAVE. Saves the current instrument settings to one of the 14 available presets.
Use the left (◄) or right (►) arrow button to select the destination preset, and
then press the ENTER button to implement the selection.
RENAME. Renames the selected preset. Perform the following steps to rename
a preset:
1. Use the left (◄) or right (►) arrow button to select the preset you want to
rename.
2. Press the ENTER button twice to begin editing the preset name. The
underscore character (_) appears under the first letter of the preset name.
3. Use the left (◄) or right (►) arrow button to move the underscore character
to the letter you want to modify.
4. Use the up (▲) or down (▼) arrow button to select the new character. The
available characters include the full alphabet, numerals from 0 to 9, and many
standard ASCII symbols. The text strings may contain up to 32 characters.
5. Enter all of the desired characters then press ENTER button.
6. Press the BACK button twice to exit the PRESET submenu. This returns to
the top of the mainframe main menu.
7. Press the ENTER button to reenter the PRESET submenu.
8. Use the up (▲) or down (▼) arrow button to select the SAVE menu item.
9. Use the left (◄) or right (►) arrow button to select the preset name edited
in step 4.
10. Press ENTER button to save the preset with the new name.
DELETE. Deletes the contents of the specified preset. Use the left (◄) or right
(►) arrow button to select the preset you want to delete, and then press the
ENTER button to implement the selection. You cannot delete the following
presets: Power on Default, User Default, and Factory Default.
SYSTEM button menu
137