Tektronix SPG8000 Technical Reference page 191

SPG8000 Technical Reference
Use GPS Time/Defer to Scheduled Time. Selects when the leap second will be
applied. Use the left (◄) or right (►) arrow button to select one of the following
options:
Use GPS Time (00:00 UTC): Applies the leap second adjustment
immediately when signalled by the GPS system at 23:59:60 UTC on June 30
or December 31 (as appropriate), regardless of the local time.
Defer to Scheduled Time. Applies the leap second at the deferred time
configured using the Scheduled Time menu item below.
Scheduled Time. Schedules a deferred time to apply the leap second adjustment.
Select this menu item and press the ENTER button to access the edit mode.
Use the left (◄) or right (►) arrow button to select a digit in the schedule time to
change. An underline character appears under the selected digit. The date and
time digits take the following form: HH:MM:SS.
After you select a digit, use the up (▲) or down (▼) arrow button to change
the value of the digit. Repeat for each digit as required. Press the ENTER to
confirm the change.
TIME button menu
179