Table 9: Output Characteristics - Tektronix AFG1022 Technical Reference

Specifications

Table 9: Output characteristics

Characteristic
Sine wave
Flatness (at 1.0 V amplitude, relative to 1 kHz)
p-p
AFG1022
AFG1062
Harmonic distortion (at 1.0 V
AFG1022
AFG1062
Total harmonic
distortion (THD)
Phase noise, typical
Spurious (nonharmonic)
Residual clock noise, typical
Square wave
Rise time/fall time (at 1 V
AFG1022
AFG1062
Jitter (rms), typical
AFG1022
AFG1062
Overshoot
Duty Cycle
Pulse
Pulse width
AFG1022
AFG1062
Resolution
Duty Cycle
AFG1022
AFG1062
6
Description
< 10 MHz: ±0.4 dB
10 MHz ≤ frq ≤ 25 MHz: ±0.7 dB
< 10 MHz: ±0.5 dB
10 MHz ≤ frq ≤ 60 MHz: ±0.9 dB
amplitude)
p-p
1 μHz to 25 MHz: < –50 dBc
Typical (0 dBm) DC to 10 MHz (included): <-60 dBc
10 MHz to 60 MHz (included): <-47 dBc
(at 1 V amplitude)
p-p
10 Hz to 20 kHz: < 0.2%
(at 1 V amplitude)
p-p
1 MHz: < –110 dBc/Hz at 10 kHz offset
(at 1 V
amplitude)
p-p
Typical (0 dBm): <-45 dBc
–57 dBm
amplitude), typical
p-p
< 12 ns
< 10 ns
< 1 ns
< 500 ps
< 5%
50% fixed
40 ns to 999 ks
17 ns to 999 ks
1 ns or 4 digits
< 1 MHz: Adjustable Duty
1 MHz ≤ frq ≤ 12.5 MHz: 50%
(limitations of pulse duty width apply)
< 1 MHz: Adjustable Duty
1 MHz ≤ frq ≤ 30 MHz: 50%
(limitations of pulse duty width apply)
AFG1000 Series Specifications and Performance Verification
PV ref page
(See page 26,
AC flatness
test.)
(See page 28,
Harmonics
distortion test.)
(See page 30,
Total harmonic
distortion test.)