Tektronix SPG8000 Technical Reference page 88

SDI button menu (Option SDI only)
Table 17: Standard SDI test signal sets (cont.)
Signal set Signals in the signal set
FLAT FIELD 0% Flat Field (Black),
50% Flat Field,
100% Flat Field (White)
100% Red Field, 100% Green Field,
100% Blue Field, 100% Cyan Field,
100% Magenta Field, 100% Yellow Field
10% Flat Field, 20% Flat Field,
30% Flat Field, 40% Flat Field,
60% Flat Field, 70% Flat Field,
80% Flat Field, 90% Flat Field
75% Red Field, 75% Green Field,
75% Blue Field, 75% Cyan Field,
75% Magenta Field, 75% Yellow Field
Black to White-1, Black to White-2,
Black to White-3, Black to White-4,
Black to White-5, Black to White-6,
Black to White-7, Black to White-8,
Black to White-9, Black to White-10,
Black to Gray-1, Black to Gray-2,
Black to Gray-3, Black to Gray-4,
Black to Gray-5, Black to Gray-6,
Black to Gray-7, Black to Gray-8,
Black to Gray-9, Black to Gray-10
Red-1 Field, Red-2 Field,
Green-1 Field, Green-2 Field,
Blue-1 Field, Blue-2 Field,
Cyan-1 Field, Cyan-2 Field,
Magenta-1 Field, Magenta-2 Field,
Yellow-1 Field, Yellow-2 Field
76
Description
Full-frame monochrome flat fields. The factory installed patterns
include 0% (black), 50%, and 100% (white).
You can install extended signal sets, which include additional
patterns for the remaining 10% increments. (See Table 18 on
page 80.)
Full-frame color flat fields. The factory installed patterns include
each of six colors (red, green, blue, cyan, magenta, and yellow)
at 100% value.
You can install enhanced signal sets, which include additional
patterns for these six colors at 75% value. (See Table 18 on
page 80.)
Full-frame monochrome flat fields available in individual patterns
from 10% to 90% in 10% increments.
These signals are not part of the factory installed signal sets. You
must install the enhanced signal sets to access these signals.
(See Table 18 on page 80.)
Full-frame color flat fields available in individual patterns of 75%
value for each of six colors (red, green, blue, cyan, magenta, and
yellow).
These signals are not part of the factory installed signal sets. You
must install the enhanced signal sets to access these signals.
(See Table 18 on page 80.)
Full-frame monochrome flat fields representing the individual
steps in the SMPTE EG 432–1 step-scale patterns available under
the MONITOR button.
These signals are not part of the factory installed signal sets. You
must install the enhanced signal sets to access these signals.
(See Table 18 on page 80.)
Full-frame color flat fields representing the individual colors in
the SMPTE EG 432–1 color-accuracy patterns available under
the COLOR BAR button.
These signals are not part of the factory installed signal sets. You
must install the enhanced signal sets to access these signals.
SPG8000 Technical Reference