Tektronix SPG8000 Technical Reference page 98

SDI button menu (Option SDI only)
86
Status. Displays the status of the logo overlay display. Use the left (◄) or
right (►) arrow button to select Disable or Enable. Press the ENTER button
confirm the selection.
Source. Displays the selected logo file. Use the left (◄) or right (►) arrow
button to select a logo file stored in the SDI7/LOGO directory. Press the ENTER
button confirm the selection.
The default logo is the "first" file in the SDI7/LOGO directory, as sorted by the
date of the logo file (oldest first). If the factory-provided logo files are installed,
the default logo is "Tektronix_logo_500x125.bmp."
However, if the user has removed the factory-provided logo files and added their
own custom files, then the default logo will be the oldest file installed in the
SDI7/LOGO directory.
NOTE.
The position of the logo overlay is referenced from the lower right of
the active raster area.
X Position. Sets the horizontal position of the logo. The position is set as a
percentage of active picture width. Use the left (◄) or right (►) arrow button to
change the position. You can set the value from -100.0% to -1.0% in 0.1% steps.
Press the ENTER button confirm the selection.
Y Position. Sets the vertical position of the logo. The position is set as a
percentage of active picture height. Use the left (◄) or right (►) arrow button to
change the position. You can set the value from -100.0% to -1.0% in 0.1% steps.
Press the ENTER button confirm the selection.
SPG8000 Technical Reference