Table 3-36: Hdlg7 Module Signal Formats - Tektronix TG700 User Manual

HDLG7 HD Dual Link Video Generator
Select the Signal Format
3–202
The following table lists the available signal formats.
NOTE.
Framing resynchronization occurs when the signal format is changed.
Selecting the 1080 50p, 1080 59.94p, or 1080 60p format forces the sampling
structure to be set to YCbCr 4:2:2 10 bits. Selecting a 2K 1080 or 2K 1556 format
will limit the sampling structure to either RGB or XYZ 4:4:4 12 bits.
Refer to SAMPLE STRUCTURE/DEPTH for more information. (See page 3-209.)

Table 3-36: HDLG7 module signal formats

1980 x 1080 format
1080 23.98sF 1080 24sF
1080 25p 1080 29.97p
1080 59.94i 1080 60i
1080 60p
1
2048x 1556 format
2K 1556 14.99sF 2K 1556 15sF
2048x 1080 format
2K 1080 23.98sF 2K 1080 24sF
2K 1080 30sF 2K 1080 23.98p
2K 1080 29.97p 2K 1080 30p
1
No SMPTE 352M identification payload is added to the output of 2048 x 1556 format signals.
Perform the following steps to select the signal format:
CAUTION.
The HDLG7 module does not generate a Clock Select warning
message when a signal format change creates a clock conflict with the output(s) of
other modules using the HD clock. If you change the signal format of the HDLG7
output, you may create a clock conflict that will cause the output of another
module to no longer conform to its selected signal format. (See page 2-16, Clock
Conflict Messages.)
1. Press the front-panel MODULE button until the HDLG7 module main menu
appears as shown below.
2. Press the FORMAT button. The menu display changes to show the currently
selected signal format as shown below.
1080 23.98p
1080 30p
1080 50p
2K 1556 17.98sF
2K 1080 25sF
2K 1080 24p
TG700 TV Signal Generator Platform User Manual
1080 24p
1080 50i
1080 59.94p
2K 1556 18sF
2K 1080 29.97sF
2K 1080 25p