Black Output Settings - Tektronix SPG8000A User Manual

Black Output Settings

Format
Field Reference
46
When the instrument is in Factory mode, a Calibration menu option is available.
See SPG8000A Service Manual for more information.
This submenu contains the Format and Field Reference selections.
Use the drop-down list to select the signal format for the selected Black output.
Not all of the formats are available for the Black outputs; the available format
choices depend on:
• The CW 10 MHz format appears only for the Black 3 output. When CW 10
MHz is the selected output format, other Black menu items are unavailable
for the Black 3 output.
The available HD output formats depend on whether the HD tri-level sync
•
rate for the selected Black output is set to integer or non-integer. (See
Table 6.)
Table 6: Black output formats
Non-integer formats
NTSC
PAL
NTSC-J
CW 10 MHz 1
1080 59.94i
1080 23.98sF
1080 29.97p
1080 23.98p
1080 59.94p
1080 47.95p
720 59.94p
1 PPS
The CW 10 MHz format selection appears only for the Black 3 output.
1
This menu item is available only for non-HD formats. Use the drop-down list to
select Enable or Disable for the field reference on the selected Black output.
Integer formats
NTSC
PAL
NTSC-J
CW 10 MHz 1
1080 60i
1080 50i
1080 24sF
1080 30p
1080 25p
1080 24p
1080 60p
1080 50p
1080 48p
720 60p
720 50p
1 PPS
SPG8000A User Manual