SYSTEM button menu
146
PS1 Fault. When enabled, sends an SNMP trap when a fault with Power Supply 1
is detected. Use the left (◄) or right (►) arrow button to select Enabled or
Disabled. Press the ENTER button to confirm the selection.
PS2 Fault. When enabled, sends an SNMP trap when a fault with Power Supply 2
is detected. Use the left (◄) or right (►) arrow button to select Enabled or
Disabled. Press the ENTER button to confirm the selection.
PS1 TWH. When enabled, sends an SNMP trap when the Power Supply 1 is
detected to have exceeded the temperature weighted hours limit. Use the left (◄)
or right (►) arrow button to select Enabled or Disabled. Press the ENTER
button to confirm the selection.
PS2 TWH. When enabled, sends an SNMP trap when the Power Supply 2 is
detected to have exceeded the temperature weighted hours limit. Use the left (◄)
or right (►) arrow button to select Enabled or Disabled. Press the ENTER
button to confirm the selection.
SPG8000 Technical Reference