Tektronix SPG8000 Technical Reference page 29

SPG8000 Technical Reference
8. Monitor the progress of the file copy operation:
a. During the first stage of the copy process, the display shows the names
of the files as they are copied. Depending on the size of the files being
copied, this may take a couple of minutes.
b. When all of the files have been copied, the message "Finishing copy..." is
displayed while the file system buffers are emptied. This message may
appear for a couple of minutes.
c. When the backup or restore operation is complete, the message "Backup
completed successfully" or "Restore completed successfully" is displayed
before the menu display returns to normal.
NOTE.
If the USB drive or the flash memory on the instrument fills up before
the backup or restore operation completes, an error message is displayed.
Press the ENTER or BACK button to clear the error message. (See page 16,
Memory requirements.)
9. After the backup or restore operation is complete, press the up (▲) or down
(▼) arrow button to select SYSTEM : USB (Mounted).
10. Press the ENTER button to unmount the USB drive. After the message "You
may now safely remove the USB drive" is displayed, the menu readout should
change to SYSTEM : USB (Not mounted).
11. Remove the USB drive from the instrument.
How to backup/restore presets and user data
17