Live Dialpad; Live Dialpad Configuration; Auto Redial; Auto Redial Configuration - Yealink VP59 Administrator's Manual

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones
Default Blank
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.

Live Dialpad

Live Dialpad allows the phones to automatically dial out the entered phone number without tapping the send key
after a designated period of time.
Topic

Live Dialpad Configuration

Live Dialpad Configuration
The following table lists the parameters you can use to configure live dialpad.
Parameter phone_setting.predial_autodial
Description It enables or disables the live dialpad feature.
0-Disabled
Permitted
1-Enabled, the phone will automatically dial out the entered phone number on the pre-dialing screen
Values
without tapping a send key.
Default
0
Web UI Settings > Preference > Live Dialpad
Parameter phone_setting.inter_digit_time
It configures the delay time (in seconds) for the phone to automatically dial out the entered phone
number without tapping a send key.
Description
Note: It works only if "phone_setting.predial_autodial" is set to 1 (Enabled) and "dial-
plan.digitmap.enable" is set to 0 (Disabled).
Permitted
Integer from 1 to 14
Values
Default 4
Web UI Settings > Preference > Inter Digit Time (1~14s)

Auto Redial

You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both
the number of attempts and waiting time between redials are configurable.
Topic

Auto Redial Configuration

Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
Parameter auto_redial.enable
It enables or disables the phone to automatically redial the last dialed number when the callee is tem-
Description
porarily unavailable.
Permitted 0-Disabled
1-Enabled
Values
342
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg