Phone Settings; Advisory Tones; Ring Tones; Screen Saver - Yealink W52P User Manual

Horizon

Hide thumbs Also See for W52P:

Table of Contents

Phone Settings

Only the settings that can be changed will be described. The locked settings are not be included.

Advisory tones are acoustic signals of your handset, which inform you of different actions and

states. The following advisory tones can be configured independently of each other:

Keypad Tone: plays when a user presses any key of the keypad.

Confirmation: plays when a user saves settings or places the handset in the charger cradle.

Low Battery: plays when the capacity of the batteries is low and the handset requires charging.

Ring tones are used to indicate incoming calls. You can set 9 different ring tones to distinguish the

incoming line on your handset. You can also set a ring tone for an incoming intercom call. When

receiving an incoming call, the handset rings the specified ring tone. You can also set the ringtone

volume.

The screen saver of the handset is designed to protect your LCD screen by filling it with an analogue

clock. You can enable the screen saver to protect the LCD screen if you do not use your handset

for a long time. When the screen saver is enabled, an analogue clock will be activated and appear

on the LCD screen if the handset is idle for approximately 10 seconds.

You can change the background of your handset by changing the colour theme. There are 2 colour

themes available.

Handset backlight status in the charging state or out of the charging state can be configured

independently of each other. If enabled, the backlight is always on. Otherwise, the backlight is

turned off after the handset is idle for a period of time. But the backlight is automatically turned on

when an incoming call arrives, a key is pressed or the status of handset changes. You can disable

the backlight to save power.

Horizon

Yealink W52P User Guide

Table of Contents