Call Park/Retrieve - Yealink T4 Series User Manual

User Guide for T4 Series IP Phones
Setting Up a Network Conference

Call Park/Retrieve

144
Downloaded from ManualsNet.com
Enter the conference URI (for example, conference@example.com) in the Conference URI
4.
field.
Click Confirm.
5.
Procedure:
Place a call to the first party.
1.
Press Conference (Conf) to place a new call.
2.
The active call is placed on hold.
Enter the number of the second party, and then press the OK key, # key or Send.
3.
When the second party answers the call, press Conference (Conf) to add the second party
4.
to the conference.
Press Conference (Conf) to place a new call.
5.
The conference call is placed on hold.
Enter the number of the new party, and then press the OK key, # key or Send.
6.
When the new party answers the call, press Conference (Conf) to add the new party to the
7.
conference.
Repeat steps 5 to 7 until you add all intended parties.
8.
The procedures for setting up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
You can use call park feature to place a call on hold, and then retrieve the call from another
search engine