Picking Up A Call With A Group Pickup Key; Call Park And Call Retrieve; Parking A Call In The Transfer Mode - Yealink T54W User Manual

4.2.4 Picking up a Call with a Group Pickup Key

You can easily select a Group Pickup key to pick up a group call.
Before You Begin: Check with your system administrator if the group call pickup code is required
for this key. If required, get the group call pickup code from your system administrator.
Procedure
2. Select the desired line key.
3. Select Key Event from the Type field.
4. Select Group Pick Up from the Key Type field.
5. Select the desired line from the Account ID field.
6. Do one of the following:
(Optional.) Enter the string that will appear on the phone screen in the Label field.
•
Enter group call pickup code in the Value field.
Highlight the Label or Value field. Select Dir ector y and select the desired contact from
•
the Directory list.
On the T57W phones, select
•
7. Select Save.
Tip: By default, you can long press the desired line key to set it.
When any phone within a predefined group of phones receives an incoming call, you can press
the Group Pickup key, and the call is answered on your phone.

4.3 Call Park and Call Retrieve

You can park a call, and then retrieve the call either from your phone or another phone. After
parked, the call is placed on hold, you can continue the conversation after retrieving it.
Note: Call park is not available on all servers. Check with your system administrator to find out if
it is available on your phone.

4.3.1 Parking a Call in the Transfer Mode

You can park a call in the transfer mode directly. When you park a call to the shared parking lot,
the call is held on your phone.
Before You Begin: Your system administrator has set call park in the Transfer mode.
Procedure
1. During a c all, select Park (You may need to select More
The call will be directly transferred to the shared parking lot.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
, and then select the desired contact.
> Park).
( )
56